SD zone control, monitor, timing control, fault diagnosis, Built-in 500W digital power amplifier

SD zone control, monitor, timing control, fault diagnosis, Built-in 500W digital power amplifier

Specifications:

  • Main: AC 220-240V, 50/60Hz
  • Backup: AC 220-240V, 50/60Hz
  • Main Power Fuse: T10AH 250V
  • Power Consumption: <720W
Compare

Master Control Unit    is the central management device of the system, which is used to manage
and monitor all devices and performvarious operations. MCU is integrated with audio storage, broadcast,
zone control, monitor, timing control, fault diagnosis, etc. functions. Built-in 500W digital power amplifier
can drive maximum 8 loudspeaker lines to meet requirements for small applications. It can also be connected
to zone expanders to increase system capacity for the requirements of large applications as well.

Specifications:

Power Supply:

  • Main: AC 220-240V, 50/60Hz
  • Backup: AC 220-240V, 50/60Hz
  • Main Power Fuse: T10AH 250V
  • Power Consumption: <720W

Amplifier:

  • Channels: 3 (Channel 1, Channel 2, and Bumper amplified)
  • THD: <0.1%
  • Output Signal: LAV
  • Control Signal: Signal and pouring container
  • Loudspeaker Circuits: 0 Ohm (Normal), 0 Ohm (Alarm), Group 1, Group 2
  • Maximum Loudspeaker Load: 500W

Inputs:

  • Microphone Input: 2
    • Input Sensitivity: 20dBV
    • Input Impedance: 2500Ω
    • Frequency Response: 100Hz-14kHz
    • SNR: 50dBth Wh
  • Auxiliary Input: 2
    • Input Sensitivity: 1V (0dBV)
    • Input Impedance: 10kΩ
    • Frequency Response: 80Hz-18kHz
    • SNR: 80dB, A-weighted
  • Mic/Line Input: 2
    • Input Sensitivity: 5mV/1V, set by DIP ch
    • Input Impedance: 200Ω
    • Frequency Response: 80Hz-18kHz
    • SNR: 80dB, A-weighted
    • Phantom Power: 24VDC, set by DIP switch

Outputs:

  • Contact Inputs: 10 contact Input Interface
  • Contact Outputs: 8010, NC Contact
  • Max Working Voltage for Outputs: AC 250V/DC 30V
  • Max Working Current for Outputs: 28A
  • DC Power Output: 24V/1A
  • Monitoring Loudspeaker: 200Ω
  • Ethernet Port: 10M/100M
  • Memory Capacity: 108 Flash Memory, 408 SD card
  • Audio Output: Channel 1, channel 2, and recording output
  • Output Channels: Channel 1, Channel 2, and recording output
  • THD: <0.1%

General:

  • Humidity: <95%, without condensation
  • Operating Temperature: -10°C ~ 50°C (14°F +122°F)
  • Storage Temperature: -40°C ~ 70°C (-40°F ~ 158°F)
  • Product Dimensions (W-H-D): 482mm-133.5mm-420mm
  • Package Dimensions (W-H-D): 580mm×279mm-652mm
  • Net Weight: 14.3Kg
  • Gross Weight: 17.Allg

Reviews

There are no reviews yet.

Be the first to review “SD zone control, monitor, timing control, fault diagnosis, Built-in 500W digital power amplifier”

Your email address will not be published. Required fields are marked *

Scroll to Top